AmetekHaydonKerk AmetekAMS
Skip to content
English
Search

PBL4850E

Brushless Motor Drive PBL4850
Watch this video to learn more about the IDEA Drive technology!
The Pittman PBL4850E IDEATM Drive brushless motor controller is a servo drive and fully programmable control unit which will simplify your machine building experience. An intuitive patent-pending Graphic User Interface (GUI) removes the complexity of programming while support tools simplify its quick integration.

Features :
  • RoHS Compliant
  • Stand-alone drive unit
  • Programming done through Graphic User Interface (GUI)
  • Automatic population of motor and drive parameters
  • Programmable Speed / Current / Accel-Decel / Current Boost / Interrupts / I/O
  • Sinusoidal commutation
  • USB Communication protocol
  • Movement Profile Plotter
  • Interactive Program Debug Feature
  • Optional motor cables

Additional Video:
Introduction to the IDEA Drive

  • Specifications +


    Part Number PBL4850E
    Drive Input Voltage Range
    		 12 to 48 VDC
    Maximum Drive Current/Phase
    		 4.0 A rms / 6.5Apeak
    Current Boost Capability
    		 Optional 30% current boost capability during ramping (6.5 Apeak max)
    Communications
    		 USB (mini B)
    Commutation
    		 Sinusoidal (Halls and encoder required)
    Motor
    		 3 Phase Brushless
    Hall Cell Spacing
    		 60° / 120°
    Encoder (min. requirement)
    		5V, Incremental encoder with 128 CPR min.
    Digital I/O Voltage Range 5 to 24 VDC
    Digital Inputs
    		 4
    Digital Input Max Current
    		 8 mA (each)
    Digital Outputs (Sinking)
    		 4
    Digital Output Max Current (Sinking)
    		 200 mA
    Maximum Temperature 70° measured at heat sink
    Program Storage Size 85 Kbytes
    Program Storage Memory Type
    		 Flash
    Maximum Number Stored Programs 85 - referenced by 10 character program names
    Position Counter Range 64 bit
    Ramping Trapezoidal or S-Curve
    Interrupt Sources
    		 4 inputs (rising, falling or both edges) Internal Position Counter (when reaching a programmed position)

  • Software Programming +



  • Dimensional Drawings +


  • Accessories +


    Accessories  Part No.
    USB Cable (A to Mini B), 2 meters 56-1346
    Power Cable, 1 meter 56-1348
    I/O Cable, 1 meter 56-1352
    Motor Connector Screw Terminal 56-1570
    Hall Cell & Encoder Cable 56-1856

  • Connection Diagrams +


    I/O Connector TABLE "A"
    PIN # DESCRIPTION NOTES
    1 GROUND I/O SUPPLY 5 - 24 VDC
    2 + I/O SUPPLY 5 - 24 VDC
    3 INPUT 1
    4 INPUT 2
    5 INPUT 3
    6 INPUT 4
    7 OUTPUT 1
    8 OUTPUT 2
    9 OUTPUT 3
    10 OUTPUT 4
    TABLE "B"
    PIN # DESCRIPTION
    1 "A" CHANNEL
    2 HALL CELL A
    3 "B" CHANNEL
    4 HALL CELL B
    5 INDEX / ENCODER
    6 HALL CELL C
    7 +5 VDC
    8 +5 VDC 
    9  GROUND 
    10 GROUND 

  • Downloads +


    Drive Manuals
    Interface Software