Size 17 43mm Double Stack with IDEA Drive

For general IDEA Drive Features and Specifications click here

Part No.	Captive	43MG(X)-V
	Non-captive	43LG(X)-V
	External Lin.	E43MG(X)-V
Wiring	Units	Bipolar
Step Angle	Degree	1.8°
Winding voltage	VDC	2.33**
Current/Phase	A rms	2.6 A
Resistance/Phase	ohms (Ω)	0.9
Inductance/Phase	mH	1.33
Power Consumption	Watts	10.4
Rotor Inertia	gcm2	78
Insulation Class		Class B (Class F available)
Weight	oz (g)	12.5 (352)
Insulation resistance	MΩ	20

** Contact Haydon Kerk if a higher voltage motor is desired.

Captive Lead Screw
Dimensions = (mm) inches 

Stroke	Dim. "A"	Dim. "B"	Suffix #	M4x0.7 Thread
0.500 (12.7)	0.78 (19.8)	0	–905	–805
0.750 (19.05)	1.03 (26.2)	0	–907	–807
1.000 (25.4)	1.28 (32.5)	0	–910	–810
1.250 (31.8)	1.53 (38.9)	0	–912	–812
1.500 (38.1)	1.78 (45.2)	0.091 (2.5)	–915	–815
2.00 (50.8)	2.28 (57.9)	0.591 (15.0)	–920	–820
2.500 (63.5)	2.78 (70.6)	1.091 (27.7)	–925	–825

Non-Captive Lead Screw
Dimensions = (mm) inches 
Up to 10-in (254 mm) standard screw lengths. Longer screw lengths are available.



External Linear
Dimensions = (mm) inches 
Up to 10-in (254 mm) standard screw lengths. Longer screw lengths are available.

FORCE vs. PULSE RATE
Chopper, Bipolar, 100% Duty Cycle, Ø .250 (6.35) Lead Screw
8:1 Motor Coil to Drive Supply Voltage



FORCE vs. LINEAR VELOCITY
Chopper, Bipolar, 100% Duty Cycle, Ø .250 (6.35) Lead Screw
8:1 Motor Coil to Drive Supply Voltage



NOTE:  All chopper drive curves were created with a 5 volt motor and a 40 volt power supply.

Ramping can increase the performance of a motor either by increasing the top speed or getting a heavier load accelerated up to speed faster.  Also, deceleration can be used to stop the motor without overshoot.

With L/R drives peak force and speeds are reduced, using a unipolar drive will yield a further 30% force reduction.

Haydon® Super Slick Greases

Haydon offers a wide selection of greases designed to meet any application requirements.  Please contact Haydon Kerk Motion Solutions for assistance in selecting the most effective lubrication option.

HSS-03

is a light viscosity, polyolester based grease thickened with PTFE.  It is an economical alternative to premium PFPE (perfluoropolyether) types where low temperature performance is a primary requirement as it provides low starting torque.

HSS-17

is a medium viscosity synthetic hydrocarbon grease thickened with lithium soap.  It is fortified with EP (extreme pressure) modifiers to increase load carrying capabilities and TFE to increase lubricity and reduce friction.  Rated temperature capacity is -20°C to +125°C. HSS-17 has the highest load characteristics.

HSS-06

is a TFE thickened heavy viscosity perfluoropolyether grease.  It is designed to operate in chemically harsh environments and provides excellent operating properties for light to medium loads.  Rated temperature capacity is -65°C to +250°C. Standard on Hybrid Actuators.

HSS-16

is a perfluoropolyether grease developed for use in vacuum environments good to 4x10–13 torr at 20°C.  Rated temperature capacity is -80°C to +204°C.

HSS-20

is an ultrafiltered version of HSS-06, meaning that the grease it put through a ‘cleaning’ process to remove any particles greater than 35 microns in size.  It is designed for use when accuracy and repeatability are of utmost concern.

Black Ice® and Kerkote® TFE Coatings

Black Ice and Kerkote TFE coatings are available in some of our actuator designs depending on the nut polymer used.  Please consult the applications engineering team to discuss lead screw nut / TFE coating compatibility.  

PCM4806E & PCM4826E Stepper Motor Drives
with USB Communication

E	43	M	G	N	-	2.33	-	910
Prefix (include only when using the following)	Series Number Designation	Style	Coils	Code ID Resolution Travel/Step		Voltage		Suffix
A=A Coil (See AC Synchronous Data Sheet) E=External K=External with 40° thread form P=Proximity Sensor S=Home Position Switch	43=43000 (Series numbers represent approximate width of motor body)	L=1.8° Non-captive M=1.8° Captive or External (use “E” or “K” Prefix for External version)	G=IDEA Drive (Size 17, 43000 Series, Bipolar only)	B=.000625-in (.0158) C=.00125-in (.0317) Y=.0025-in (.0635) AG=.00375-in (.0953) Z=.005-in (.127)		2.33 = 2.33 VDC Custom V available		Example: 910=1in (Refer to Stroke chart on Captive motor series product page.) Suffix also represents: 800=Metric 900=External Linear with grease and flanged nut–XXX=Proprietary suffix assigned to a specific customer application. The identifier can apply to either a standard or custom part.

NOTE: Dashes must be included in Part Number (–) as shown above. For assistance call our Engineering Team at 203 756 7441.