AmetekHaydonKerk AmetekAMS
Skip to content
English
Search

MiniSlide with 20mm Can-Stack Motor

SS Spline Shaft
Small Size - Big Power
The MiniSlide is a miniature motorized linear rail powered by our 20 mm can-stack motor. This compact solution is easy to integrate and is Ideally suited for use in small lab and automation equipment.
  • 20mm Can-Stack Motor
  • Reduces design effort for engineers
  • Compact size, stable platform
  • Easy to integrate
  • Stroke lengths up to 150mm

  • Specifications +


    Can-Stack Stepper Motor   Ø 20 mm (.79-in) 19000 Series Motor
    Step Angle
    		 7.5°
    Wiring
    		 Bipolar
    Winding Voltage 5 VDC 12 VDC
    Current (RMS)/phase 350 mA 160 mA
    Resistance/phase 14.0 Ω 74.5 Ω
    Inductance/phase 6.24 mH 31.2 mH
    Power Consumption 3.38 W
    Insulation Class Class B
    Weight 1.24 oz (35 g)
    Insulation Resistance 20 MΩ

  • Load Specifications +


    MiniSlide Load Specifications
    Design Payload (mass)
    		 2.3kg  [5 lbs]
    Axial Force   45N  [10 lbf]
    Roll Moment*   1.13N-m [10 lbf-in]
    Pitch Moment*  1.13N-m [10 lbf-in]
    Yaw Moment* 0.56N-m [5 lbf-in]
    Repeatability +/-25µm [0.001 in]
    * Moment data based on 0.5° deflection
     

  • Dimensional Drawings +





    Dimensions
     Stroke Rail Length "L" Mounting Holes "X"
     25mm  69.4mm  62.1mm
     50mm  94.4mm  86.5mm
     75mm  119.4mm  111.5mm
     100mm  144.4mm  136.5mm






  • Carriage Mounting Dimensional Drawings +





  • Performance Curves +


  • Part Number Guide +


    Ordering Part Number for MiniSlide motorized with Can-Stack Motor
    MSA  02 K — H 0020 — XXX
     Prefix  Frame Size Coating   *   Motor  Nominal Thread
    Lead Code    		  *   Suffix
     MSA  =
    Mini Slide
    Actuator    		  02 =
    1/8" Screws    		  K = TFE Kerkote
    		   C = 20mm
    Can-Stack
    Stepper 

    		 0020 = 1/2mm lead     805 = 50mm stroke
    M3 mounting
     B = TFE Black Ice 0039 = 1mm lead  810 = 100mm stroke
    M3 mounting 
    G = Grease 
    		  0079 = 2mm lead  905 = 50mm stroke
    #4-40 mounting
     S = No Lubricant


    		 0157 = 4mm lead  910 = 100mm stroke
    #4-40 mounting
    0315 = 8mm lead 
     0012 = 0.012" lead XXX =  Unique identifier **
     0024 = 0.024" lead
     0048 = 0.048" lead
    0096 = 0.096" lead 
    *NOTE: Dashes must be included in Part Number (–) as shown above.
    ** Unique Identifier can be used to indicate additional options and/or product modifications.
     For assistance, call our Engineering Team at +1-203-756-7441.